Dec 1, 2020 | Start Looping (Old Stle)
Day 18 (published 21 December 2020) Updating Loop There is a pretty good LoopDocs article on Updating Loop. But, I am going to drive home a few points here, so please read this before moving on to the article. You should always be ready to rebuild/update Loop,...
Dec 1, 2020 | Start Looping (Old Stle)
Day 17 (published 20 December 2020) References to loopdocs.org Building Loop: https://loopkit.github.io/loopdocs/build/step14/ Build errors: https://loopkit.github.io/loopdocs/build/build_errors/ Code Customization: ...
Dec 1, 2020 | Start Looping (Old Stle)
Day 15 (published 18 December 2020) What to Buy First? Since you have decided to start looping (you did decide, right, otherwise you wouldn’t still be reading these pages?), it is time to start ordering the necessary parts. RadioLink You can order both RileyLink...
Dec 1, 2020 | Start Looping (Old Stle)
Day 14 (published 17 December 2020) Initial Loop Set Up and Configuration The settings that you’ll see when you first open Loop will vary based upon which branch of Loop you’ve built. This guide will focus primarily on Master branch but will provide information...
Dec 1, 2020 | Start Looping (Old Stle)
Day 13 (published 16 December 2020) Settings What is different from my current pump and Loop How do I prepare for Loop settings??? Settings are very important! Loop does math every 5 minutes to make decisions on raising, lowering, delivering a micro bolus, suspending...
Dec 1, 2020 | Start Looping (Old Stle)
Day 12 (published 15 December 2020) Compatible CGM’s https://loopkit.github.io/loopdocs/build/step4/ The following CGM’s can be used with the Master, Dev, and AB Branches: Dexcom G6 Dexcom G5 Medtronic Enlight (must be connected to loop via a Medtronic loopable pump)...
