|
|
NEWS From Loop and Learn
Seeing Double, Shareclient Error, Sugarmate, Custom Type One, Apple Watch, FreeAPS
|
|
|
|
Countdown to 2022!
As 2021 comes to a close, we will be sharing tips and ideas to help us all be better Loopers in 2022! Check out our FB page for more details!
|
|
|
|
|
Seeing Double?
| |
If you're seeing double-ended trend arrows in Nightscout, you're not alone. On December 1, Dexcom made a change to its non-US servers that triggered these double-ended trend arrows. At this point, the US servers have also been impacted. These arrows are annoying, but are primarily a display issue except as described below in Shareclient Error. What should you do?
- Update your Nightscout site to 14.2.5. Read about the changes included in Nightscout 14.2.5 and update your site by clicking on the links below.
- Delete "bridge" from your Heroku ENABLE config var, and select Upload Readings from within Loop/Settings/CGM.
To make updating Nightscout even easier, you can Enable Automatic Deploys in Heroku. Automatic Deploys will allow you to update your Heroku apps automatically when you update your GitHub repository- you will not need to login into Heroku and perform a Manual Deploy. For more details, click on the Automatic Deploys link below.
#WeAreNotWaiting
|
|
|
|
|
|
Shareclient Error
| |
For most Loopers, the double-ended trend arrows described above are annoying, but are primarily a display issue UNLESS
- You have Dexcom Share credentials entered into your G6 CGM Settings in Loop AND you did not enter the current Transmitter last time you changed it
- OR - you are using Dexcom Share as your CGM source using an official Dexcom App to upload to share
In those two cases, you will probably get a red loop with no CGM entries being recognized and see a Shareclient Error with the words failed to decode an SGV record.
What should you do? Delete your CGM from within Loop Settings and then add back your CGM and its Transmitter ID, but leave Dexcom Share as "Tap to set".
|
|
|
|
|
|
Sugarmate Update
As of December 9, Sugarmate is again available to US users of Dexcom share. There are two options for your Sugarmate CGM source,
- Dexcom or
- Nightscout. If you select Nightscout, you must Upload Readings directly from Loop. You cannot use the Nightscout bridge. Delete "bridge" from your Heroku ENABLE config var, and select Upload Readings from within Loop/Settings/CGM.
Follow the instructions in the Reconnecting link below.
If you're located outside of the US, Nightscout can be used as a CGM source for Sugarmate, but only for already installed apps since Sugarmate is not currently available in the App Store. There is no timeline for when Sugarmate users outside of the US will also be able to connect directly from Dexcom to Sugarmate, or will need to remove "bridge" from their ENABLE config vars.
|
|
|
|
|
Custom Type One
|
|
Jon Fawcett, the developer of Loop Follow, the AB Switcher Patch, and a troubleshooter for Loopers who need help, is working on a new set of videos that will include Loop Tips, Xcode Tips, GitHub and Git Tips, and Nightscout Clean-Up. The first video in this series is Loop Tips: #1 Mac Basics. Click on the Custom Type One link below to sign up for his YouTube channel to stay in the loop (and fulfill one of your New Year's resolutions to learn something new).
|
|
|
|
|
|
Warning: Apple Watch Users
|
| If you add carbs using your watch and then delete those carbs from your iPhone before your watch and phone carbs are "in sync", those carbs will reappear.
Some users report that the Bolus Screen does not open automatically following Carb Entry from watch. This may be just for watchOS 8. Do not try to enter carbs again just because the bolus screen did not appear.
|
|
|
|
|
|
FreeAPS v2.2 (204) Has Been Released
|
|
FreeAPS (the Loop fork) has lots of improvements underway. In addition to new translations, the updates include: - Changed WatchApp:Reduced number of decimal points displayed to 2. Changed bolus from Watch increment to 0.05 u
- Modified Override Range of 35% to 200% by increments of 5% (may be customized)
- Changed enactBolus - Automatic vs Manual: Add variable to monitor if bolus is manual or automatic
- OmniPod Enhancements
Check out the links below for more details!.
|
|
|
|
|